How to Handle Power Cuts and Failed EV Charging Sessions
A power cut or charger fault should never leave a driver paying for energy they did not receive. A good setup first tries to resume the session, and if that fails it bills only for the energy delivered and refunds the rest automatically.
Failed sessions are one of the quickest ways a charging station loses driver trust. They also create complaint calls and manual refund work for the owner. This article explains what to plan for.
Why sessions fail
Sessions can stop for many reasons. Most are outside the driver's control:
- Grid power cuts or voltage dips at the site
- Charger faults or a gun that is not communicating
- Network or internet drops between the charger and the software
- A charger that is offline before the driver even pays
India sees frequent supply interruptions at some sites, so you should plan for these events rather than treat them as rare.
The cost of handling it badly
When the software has no clear rule for interruptions, problems build up:
- Drivers pay in advance and are left waiting for a refund
- Staff handle complaint calls and reconcile payments by hand
- Drivers avoid a station where they once lost money
- Disputes arise over what was actually delivered
What a good interruption policy includes
1. Check status before taking payment
The best fix is to stop the problem before it starts. The platform should show the charger's live status before the driver pays. If the charger is offline, payment should be blocked entirely. This removes a whole class of failed sessions.
2. Try to resume automatically
If a session is interrupted, for example by a short power cut, the platform should first try to resume it. Many interruptions are brief, and the driver may never need to do anything.
3. Charge only for delivered energy
If the session cannot resume, the driver should pay only for the energy actually delivered. The rest of the payment should go back to them.
4. Refund without a complaint call
Refunds should happen automatically, not after a phone call or a form. A failed session being refunded automatically saves your staff time and protects the driver's confidence.
5. Show prices and costs clearly
Disputes are fewer when the per-kWh price is shown before payment, the cost updates live during charging, and a receipt reaches the driver afterwards. Then everyone can see what was delivered and what was charged.
6. Log faults automatically
Faults should open an incident on their own and close when the charger recovers. Continuous uptime measurement gives you a record to show a charger maker, a site host or a municipality, and helps you spot chargers that fail repeatedly.
Questions to ask any platform vendor
- Is the charger status shown before payment, and is payment blocked when it is offline?
- Does it try to resume an interrupted session?
- How is the refund calculated, and is it automatic?
- Where does the refund go: the driver's bank or an app wallet?
- Are faults logged without manual effort?
- Does it work with the OCPP chargers you already own?
How Morphcharge can help
Drivers scan a QR code and pay by UPI or card. There is no app to download and no wallet to load. For the situations above, the platform works like this:
- It shows the gun's live status before money moves and blocks payment on an offline charger.
- If a session is interrupted, it first tries to resume automatically. Failing that, it charges only for delivered energy and refunds the rest, with no complaint call.
- Drivers pay per session, and unused money returns to their own bank, not an app balance.
- The per-kWh price is shown before payment, cost updates live, and a tax-compliant receipt follows.
- Each charger's uptime is measured continuously, and faults open incidents automatically and close on recovery.
It works with OCPP 1.6-J chargers from any brand, and a charger already installed can typically be added in about 30 minutes. Settlement goes to the station owner's bank account. Pricing is shared on enquiry. To see it work, you can book a demo through morphcharge.com or call +91 77579 97350.
Frequently asked questions
- What should happen if a power cut stops an EV charging session?
- The platform should first try to resume the session. If it cannot, the driver should be charged only for the energy delivered and the remainder refunded.
- Can payment be blocked on an offline EV charger?
- Yes, if the platform shows live charger status before payment. Morphcharge blocks payment on an offline charger so the driver does not pay for a session that cannot start.
- Does the driver need a wallet or app to get a refund?
- Not with Morphcharge. Drivers pay per session by UPI or card, and unused money returns to their own bank rather than an app balance.
- Does Morphcharge work with chargers I already own?
- It works with OCPP 1.6-J chargers from any brand. A charger that is already installed can typically be added in about 30 minutes.