How to Add an Existing EV Charger to a Management Platform
An already-installed charger can usually be added to a charging management platform without new hardware, provided it supports the OCPP protocol (commonly version 1.6-J). The work is mostly configuration on the charger, plus payment and settlement set-up on the platform side.
This guide walks a station owner or operations manager through the steps, so you know what to check before you commit.
Step 1: Confirm your charger speaks OCPP
OCPP (Open Charge Point Protocol) is the standard language chargers use to talk to a central management system. If your charger supports it, it can in principle connect to platforms from different vendors, so you are not locked to the charger maker's own software.
Check these things:
- The charger's datasheet or manual mentions OCPP, and which version (1.6-J is the most common today).
- You can access the charger's configuration page or app, or your installer can.
- The charger has a working internet connection (Wi-Fi, Ethernet or SIM).
If the datasheet is unclear, ask the charger supplier or installer before you go further.
Step 2: Decide what you need from the platform
Before connecting, write down what the software must do for your site. For most operators in India this list includes:
- Driver payments by UPI or card, ideally without making drivers install an app.
- Live charger status so drivers do not pay for a charger that is offline.
- Failed-session handling, including automatic refunds.
- GST-compliant receipts for drivers.
- Settlement to your own bank account, and how fast it arrives.
- Uptime and fault tracking so you know when a charger needs attention.
- Branding, if you are a CPO or OEM who wants your own name on the experience.
Step 3: Register the charger and set the connection
The typical connection flow for an OCPP charger is short:
- Register the charger on the platform with its identity (charger ID).
- On the charger, enter the platform's connection address and the charger ID in its settings.
- Restart or save, and wait for the charger to show as online on the platform.
Morphcharge describes this as registering the charger, changing two settings on the charger, and seeing it go ONLINE. For a charger that is already installed, Morphcharge says it can typically be added in about 30 minutes, with the station live the same day.
Step 4: Set up your tariff and payment flow
Once the charger is online, set the per-kWh tariff you want drivers to see. Good practice is that the price is shown before payment, the cost updates live during charging, and a receipt arrives afterwards.
For drivers, the simplest flow is: scan a QR code on the charger, pay by UPI or card, and start charging. No app download, no wallet top-up and no registration means fewer drivers walk away at the charger.
Step 5: Set up settlement to your bank
Ask every platform how and when money reaches you. Questions to ask:
- Does the money go directly to your bank account?
- What is the standard settlement time (for example next working day)?
- Is faster settlement available, and is there an extra charge?
- How are revenue splits handled if a landlord, CPO or partner shares income?
Morphcharge states that each partner settles directly to their own bank, with next-working-day (T+1) settlement as standard and same-day settlement available on request. Charges for these are discussed on enquiry.
Step 6: Test before you announce
Do a few real test sessions before telling customers:
- Scan the QR on a phone that has never used the platform.
- Pay a small amount by UPI and by card.
- Start and stop a session and check the receipt.
- Pull the plug mid-session to see how interruption is handled (resume, or charge only for energy delivered and refund the rest).
- Check that an offline charger blocks payment.
Common mistakes to avoid
- Assuming every charger is OCPP-ready. Some older or locally branded units are not.
- Ignoring connectivity. A weak SIM or Wi-Fi signal causes more downtime than software does.
- Not testing refunds. Failed sessions are where driver trust is won or lost.
- Skipping the fee model. Understand how the platform charges, including any minimum usage, before you sign.
How Morphcharge can help
It works with OCPP 1.6-J chargers from any brand, so many existing chargers can be added without replacing hardware. Drivers scan a QR code and pay by UPI or card, with no app and no account. The platform shows live charger status before payment, refunds failed sessions automatically, issues GST e-receipts, and opens fault tickets automatically when a charger has a problem.
A new station typically goes live in 30 to 45 days from order, and a charger already on site can be added in about 30 minutes. White-label branding is available for CPOs and OEMs. Pricing is shared on enquiry. You can book a demo on morphcharge.com or call +91 77579 97350; the team can explain the flow over a call, and show the live dashboard on a video meeting.
Frequently asked questions
- Can I add a charger that is already installed to Morphcharge?
- Yes, if it supports OCPP 1.6-J. Morphcharge says an installed charger can typically be added in about 30 minutes and go live the same day.
- Do my customers need to download an app?
- No. Drivers scan the QR code, pay by UPI or card and charge, without an app or account.
- What happens if a charging session fails?
- Morphcharge says failed sessions are refunded automatically. If power is interrupted, it first tries to resume, otherwise charges only for energy delivered.
- How does the money reach my bank account?
- Each partner settles directly to their own bank. Next-working-day settlement is standard, and same-day settlement is available on request; details are shared on enquiry.
- Is it only for independent station owners?
- No. It is also used by CPOs, OEMs and other site hosts, with white-label branding available for CPOs and OEMs.